Subframes

Subframe Complete Assemblies - Cone Suspension
1976 on
Subframe complete assemblies were conceived as a quick and easy way of getting a new British Motor Heritage Mini bodyshell onto its wheels as a
rolling shell. Being suitable for any 1976 on models they are also however very convenient large assemblies to use during the major rebuild of a Mini,
dispensing with the need to transfer all the running gear over when replacing subframes.
Including all running gear components - on the front subframe this means all suspension, brakes, brake pipes and hoses, swivels, hubs and driveshafts,
while the rear includes suspension, brakes, brake pipes and hoses, brake cables and hubs - subframe complete assemblies are undoubtedly the most
cost-effective way of renewing everything mechanical on a Mini bar the engine, gearbox and steering rack.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	HMP241001	SUBFRAME COMPLETE ASS'Y, front, rubber mounted	1	1976-96, manual; includes suspension, hubs and brakes.
	HMP241003	SUBFRAME COMPLETE ASS'Y, front, rubber mounted	1	1997 on, manual; includes suspension hubs and brakes.
2	HMP241002	SUBFRAME COMPLETE ASS'Y, rear	1	1976 on; includes suspension hubs and brakes.

Subframe Assemblies - Cone Suspension
Saloon 1959-64; 1969 on (Except Clubman Saloon and Cooper S MkIII, 1969-71)
Traveller, Clubman Estate, Van and Pick Up
At first glance the choice of subframes for 'dry' suspension cars seems bewildering; actually this is not really the case. As far as front subframes are
concerned, they essentially divide into pre-1976 (solid mounted) and post-1976 (rubber mounted), with a choice of manual or automatic gearbox.
Additionally, Fuel injected cars use a subframe with slightly repositioned engine mounting points and the 1997 on models include brackets for the front
mounted radiator. A 'Dry' rear subframe may be chosen with or without its mounting trunnions, and there are variations for the German market (for which
a towing eye was mandatory) and later 13" wheel fitted models (which necessitated a stronger subframe assembly process).
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
3	21A2570	SUBFRAME ASSEMBLY, front, solid mounted	1	1959-75, manual.
	21A1816	SUBFRAME ASSEMBLY, front, solid mounted	1	1964-75, automatic.
4	KGB10022	SUBFRAME ASSEMBLY, front, rubber mounted	1	1976-90, manual. 1991-92, 998cc models.
	KGB10027	SUBFRAME ASSEMBLY, front, rubber mounted	1	1991-96, manual, 1275cc models.
	KGB100500	SUBFRAME ASSEMBLY, front, rubber mounted	1	1997 on, manual.
	KGB10024	SUBFRAME ASSEMBLY, front, rubber mounted	1	1976 on, automatic.
5	KHB10026	SUBFRAME ASSEMBLY, rear, with trunnions	1	Includes mounting trunnions.
6	FAM6292	SUBFRAME ASSEMBLY, rear, without trunnions	1	1959-91; for 'cotton reel' mounted exhaust.
	KHB10024	SUBFRAME ASSEMBLY, rear, without trunnions	1	1992 on; includes rods for rubber exhaust mountings.
	KHB10024P	SUBFRAME ASSEMBLY, rear, without trunnions	1	Alternative; non-genuine. Does not include mounting rods.
	KHB10023	SUBFRAME ASSEMBLY, rear, without trunnions	1	Accepts towing eye; Germany.
	KHB100590	SUBFRAME ASSEMBLY, rear, without trunnions	1	13" wheel models (Silverstone, Sport Pack and Cooper Sport).

The rods for 1992 onwards rubber exhaust mountings are available separately to repair a late subframe or to convert a FAM6292 subframe to 1992 on specification:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
	KHU10011	ROD, exhaust mounting hanger, rear subframe	1	1992 on; forward position ('centre mounting').
	KHU10012	ROD, exhaust mounting hanger, rear subframe	1	1992 on; rearward position ('tail mounting').

Subframe Assemblies - Hydrolastic Suspension
Saloon 1964-69; Clubman Saloon and Cooper S MkIII 1969-71
By comparison the range of subframes utilised on 'wet' suspension Minis is very simple indeed, as the period in which they were fitted was very short
and none of the estate, van or pick up derivatives ever used 'wet' suspension anyway.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
7	21A1846	SUBFRAME ASSEMBLY, front	1	Manual.
	21A1733	SUBFRAME ASSEMBLY, front	1	Automatic.
8	21A2160	SUBFRAME ASSEMBLY, rear	1	Not Cooper, Cooper S, Elf or Hornet 1964-67.
	21A1588	SUBFRAME ASSEMBLY, rear	1	Cooper, Cooper S, Elf and Hornet, 1964-67.
	21A1588P	SUBFRAME ASSEMBLY, rear	1	Non-genuine.

Rear Subframe Brackets
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
9	21A195	BRACKET, outer, radius arm, RH	1	Included in cone suspension subframe assembly.
	21A1980	BRACKET, outer, radius arm, RH	1	Included in Hydrolastic suspension subframe assembly.
10	21A197	BRACKET, outer, radius arm, LH	1	Included in cone suspension subframe assembly.
	21A1982	BRACKET, outer, radius arm, LH	1	Included in Hydrolastic suspension subframe assembly.
11	ARB002	BRACKETS, outer radius arms, pair, camber and track adjustable	1	For fast road or competition use.
12	SH605061	SCREW, bracket to subframe	2	Included in subframe assembly.
13	LWZ205	WASHER, locking	2	Included in subframe assembly.
14	SH605061	SCREW, bracket to subframe	6	Not included in subframe assembly.
15	LWZ205	WASHER, locking	6	Not included in subframe assembly.
16	PWZ105	WASHER, plain	4	Not included in subframe assembly.
17	21A1601	PACKING, bump stop	2	Not included in subframe assembly. Cooper S and 1275GT,
				1963-80; optional on saloons 1980-85; all saloons 1985 on.
18	13H2176	CLIP, packing to subframe	2	Not included in subframe assembly. Cooper S and 1275GT,
				1963-80; optional on saloons 1980-85; all saloons 1985 on.
19	FAM1559	TOWING EYE	1	Not included in subframe assembly; Germany, if required.
20	FAM1560	TUBE, support, towing eye	1	Not included in subframe assembly; Germany, if required.
21	BT606411	BOLT, towing eye	1	Not included in subframe assembly; Germany, if required.
22	LWZ206	WASHER, locking	1	Not included in subframe assembly; Germany, if required.
23	FNZ106	NUT	1	Not included in subframe assembly; Germany, if required.

'Solid' Front Subframe Mountings
1959-75
Bolting the subframe suspension towers to the dash crossmember of the car would seem to be a very simple process, but as you've probably
guessed already the Mini, being assembled with different detail parts at different factories in the 1960s, makes things rather more complex
than need be. Please read on...
Models up to 1962 approximately (i.e. those with the very earliest types of dash crossmember) could have the subframe towers held to the dash
crossmember by bolts or studs and lock tabs which initially didn't, and then did, allow access to the rubber cone compression nuts. After this time
bolts were used exclusively on cone (dry) suspension cars. Hydrolastic (wet) suspension subframes were also held to the dash crossmember by a
choice of bolts or studs. The only real consistency is that bolts were always used to attach the subframe towers on the Cooper and Cooper S.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
24	SFK001	FRONT SUBFRAME FITTING KIT	1	Cone suspension type subframe.
25	SFK002	FRONT SUBFRAME FITTING KIT	1	Hydrolastic type subframe.

Tower Bolts, 1959-62 Approx. (cone suspension; alternative to studs)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
26	21A90	BOLT, subframe tower to dash crossmember	4
27	2A4343	LOCK TAB, tower bolts	2	Without access hole for rubber cone compression nut.

Tower Studs, 1959-62 Approx. (cone suspension; alternative to bolts)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
28	21A499	STUD, subframe tower to dash crossmember	4
29	FNZ505	NUT	4
30	21A500	LOCK TAB, tower nuts	2	Without access hole for rubber cone compression nut.
31	ACA8220	LOCK TAB, tower nuts	2	With access hole for rubber cone compression nut.

Tower Bolts, 1962 Approx. to 1975 (cone suspension)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
32	21A90	BOLT, subframe tower to dash crossmember	4
33	21A1470	LOCK TAB, tower bolts	2
34	RFR220	PLUG, lock tab	2

Tower Bolts, 1964-71 (Hydrolastic suspension)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
35	21A1694	BOLT, subframe tower to dash crossmember	4
36	53K3721	WASHER, locking, Belleville	4

Tower Studs, 1964-71 (Hydrolastic suspension)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
37	53K1483	STUD, subframe tower to dash crossmember	4
38	FNZ505	NUT	4
39	53K3721	WASHER, locking, Belleville	2
40	21A1487	RETAINER, hydrolastic hose sleeve	2	Hydrolastic suspension.
41	SH605071	SCREW, subframe rear to toeboard	4
42	PWZ205	WASHER, plain	4
43	PWZ105	WASHER, plain	4
44	LWZ305	WASHER, locking	4
45	FNZ105	NUT	4
46	SH605081	SCREW, subframe to front panel	2	UK and markets not requiring towing eyes.
47	PWZ105	WASHER, plain	4
48	LWZ205	WASHER, locking	2
49	FNZ505	NUT	2
50	21A1220	EYEBOLT, towing, subframe to front panel	2	Export markets requiring towing eyes; does not fit Clubman.
51	21A1241	EYEBOLT, towing, subframe to front panel	2	Export markets requiring towing eyes; will also fit Clubman.
52	FNZ106	NUT, eyebolt shoulder	2	Use with 21A1241 eyebolt type.
53	PWZ106	WASHER, plain	2
54	LWZ206	WASHER, locking	2
55	FNZ506	NUT	2
56	2A4292	SHIM, subframe to front panel	A/R

'Rubber' Front Subframe Mountings
1976 On
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
57	SFK003	FRONT SUBFRAME FITTING KIT	1	Includes all mountings and fixings.
58	21A2596	BOLT, subframe tower to dash crossmember	2
59	53K3755	WASHER, tower bolt	2
60	21A2597	MOUNTING, tower bolt to dash crossmember	2
61	21A2598	PAD, pressure, subframe to dash crossmember	2
62	21A2599	MOUNTING, subframe to toeboard	2
63	SH605061	SCREW, mounting to subframe	4
64	PWZ105	WASHER, plain	4
65	LWZ205	WASHER, locking	4
66	FNZ105	NUT	4
67	SH605061	SCREW, mounting to toeboard	4	1976-82 approx. (imperial thread).
68	PWZ205	WASHER, plain	4
69	LWZ205	WASHER, locking	4
70	FNZ105	NUT	4
71	NAM3323	STRAP ASSEMBLY, mounting to toeboard	2	1982 approx. on (metric thread).
72	GHF382	WASHER, locking	4
73	GHF213	NUT, metric	4
74	21A2624	MOUNTING, subframe to front panel	2
75	SH605081	SCREW, mounting to subframe	2
76	PWZ105	WASHER, plain	4
77	LWZ205	WASHER, locking	2
78	FNZ105	NUT	2
79	2A4292	SHIM, mounting to subframe	A/R
80	SH605081	SCREW, mounting to front panel	2/1	Qty. reduces when towing eyebolt fitted.
81	21A1220	EYEBOLT, towing, subframe to front panel	2	1976-92, some export markets except Germany; does not fit Clubman.
82	21A1241	EYEBOLT, towing, subframe to front panel	2	1976-92, some export markets except Germany; will also fit Clubman.
83	FNZ106	NUT, eyebolt shoulder	2	Use with 21A1241 eyebolt type.
84	FAM1504	EYEBOLT, towing, mounting to front panel	1	1976-92, Germany. Not Clubman models.
	FAM1785	EYEBOLT, towing, mounting to front panel	1	1976-82, Germany. Clubman models.
	KPU100130	EYEBOLT, towing, mounting to front panel	1	1993-96.
	KPU100160	EYEBOLT, towing, mounting to front panel	1	1997 on.
85	LWZ205	WASHER, locking screw	2	Use with mounting screws only.
	LWZ206	WASHER, locking eyebolt	2	Use if towing eye to be fitted.

'Rubber' to 'Solid' Front Subframe Mountings Conversion
Previously the reserve of the racing boys, these solid mountings to replace the original 1976 on rubber type are now available for all. They will
sharpen responses and remove the slight vagueness or lumpiness of 1976 on Mini handling (vague by comparison to earlier Minis, but not by comparison
to most cars!). Be aware that the trade off for using them is more noise and vibration (but let's face it, everything else that's going on in a low-flying Mini
would probably drown it out anyway...).
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
86	ATSM001	SOLID MOUNTING CONVERSION, subframe tower	1	Pair of alloy mountings.
87	SM001	SOLID MOUNTING CONVERSION, front panel mountings	1	Pair of solid mountings.
88	SM002	SOLID MOUNTING CONVERSION, toeboard mountings	1	Pair of solid mountings.

Rear Subframe Mountings
1959-75
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
89	SFK004	REAR SUBFRAME FITTING KIT	1	Includes all bushes and fixings.
90	HMP841014E	FIXINGS KIT, trunnions	1	Includes all fixings for 4 trunnions.
91	2A5819	TRUNNION, subframe mounting	4
92	2A5818	BUSH, standard rubber, trunnion (two per trunnion)	8
	C-STR638	BUSH, uprated polyurethane, trunnion (two per trunnion)	8
93	21A1440	PIN, subframe to heelboard mounting support	2
94	PWZ207	WASHER, plain	4
95	LNZ207	NUT, nyloc	4
96	SH605201	SCREW, trunnion to heelboard, long	2
97	SH605121	SCREW, trunnion to heelboard, short	2
98	LWZ205	WASHER, locking	4
99	BH605201	BOLT, trunnion to load floor, long	2
100	BH605101	BOLT, trunnion to load floor, short	2
101	PWZ105	WASHER, plain	4
102	LWZ205	WASHER, locking	4
103	FNZ105	NUT	4

1976 On
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
104	SFK005	REAR SUBFRAME FITTING KIT	1	Includes all bushes and fixings.
105	HMP841014	FIXINGS KIT, trunnions	1	Includes all fixings for 4 trunnions.
106	21A2558	TRUNNION, subframe to heelboard	2
107	21A2560	BUSH, standard rubber, trunnion (one per trunnion)	2
	C-STR639	BUSH, uprated polyurethane, trunnion (one per trunnion)	2
108	2A5819	TRUNNION, subframe to load floor	2
109	2A5818	BUSH, standard rubber, trunnion (two per trunnion)	4
	C-STR638	BUSH, uprated polyurethane, trunnion (two per trunnion)	4
110	21A1440	PIN, subframe to heelboard mounting support	2
111	PWZ207	WASHER, plain	4
112	LNZ207	NUT, nyloc	4
113	SH605201	SCREW, trunnion to heelboard	4
114	LWZ205	WASHER, locking	4
115	BH605201	BOLT, trunnion to load floor, long	2
116	BH605121	BOLT, trunnion to load floor, short	2
117	PWZ105	WASHER, plain	4
118	LWZ205	WASHER, locking	4
119	FNZ105	NUT	4

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Subframes

BRACKET-OUTER-RADIUS ARM TO SUBFRAME-DRY LH

USE: 21A195

BRACKET-OUTER-RADIUS ARM TO SUBFRAME-DRY-RH

SUBFRAME-REAR-HYDROLASTIC-NON GENUINE

USE: 21A1588P 21A2160

SUBFRAME-REAR-HYDROLASTIC- GENUINE

SUBFRAME-FRONT-HYDROLASTIC-AUTOMATIC

SUBFRAME-FRONT-HYDROLASTIC-MANUAL

WIRE HANGER-REAR SUBFRAME-TAIL 1990 ON

WIRE HANGER-REAR SUBFRAME-CENTRE 1990 ON

SUBFRAME-REAR-DRY- SPORTS PACK

USE: FAM6292

We accept