Rear suspension - rubber cone

Radius Arms
All Saloons 1959-64. 850 and 1000 Saloons 1969-71; All Saloons and Cabriolets 1971 On.
All Travellers, Clubman Estates, Vans and Pick Ups.
Towards the end of the 1980s the rubber cone suspension radius arms were modified to incorporate a stub axle seal. Also, the steel lubricating tube for the radius arm pivot shaft was replaced with a nylon item. These are the only new rubber cone suspension radius arms now available.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	NAM7162	RADIUS ARM ASS'Y, RH, with stub axle and seal, new	1
	NAM7162R	RADIUS ARM ASS'Y, RH, with stub axle and seal, reconditioned, exchange	1
2	NAM7163	RADIUS ARM ASS'Y, LH, with stub axle and seal, new	1
	NAM7163R	RADIUS ARM ASS'Y, LH, with stub axle and seal, reconditioned, exchange	1
3	CDU1173	SEAL, stub axle	2	1986 on, plus all replacement radius arms. Included in radius arm assemblies.
4	2A7351	STUB AXLE, RH (RH thread)	1	Included in radius arm assemblies.
	2A7364	STUB AXLE, LH (LH thread)	1	Included in radius arm assemblies.
5	2A7352	CIRCLIP, stub axle retaining	2	Included in radius arm assemblies.
6	21A397	BRACKET, brake pipe	2	Included in radius arm assemblies.
7	51K3274	SCREW, brake pipe bracket to radius arm	4	Included in radius arm assemblies.
8	GSV1125	REBUILD KIT, radius arm pivot	2
9	ATJ4098	BEARING, needle roller, radius arm inner end	2	Included in radius arm assemblies and rebuild kit.
10	21A396	TUBE, lubricating, original steel	2	Nylon equivalent now supplied in radius arm assemblies and rebuild kit.
11	2A7325	BUSH, radius arm outer end	2	Included in radius arm assemblies and rebuild kit.
12	ACA9099	SHAFT, radius arm pivot	2	Included in rebuild kit.
13	ACA9302	WASHER, thrust, radius arm inner end	2	Included in rebuild kit.
14	2A7324	WASHER, thrust, radius arm outer end	2	Included in rebuild kit.
15	2A7327	SEALING RING, rubber	4	Included in rebuild kit.
16	FNZ508	NUT, shaft retaining	4	Included in rebuild kit.
17	LWZ208	WASHER, locking	4	Included in rebuild kit.
18	LN10051	GREASE NIPPLE, straight	2	Included in rebuild kit.
19	14A6615	SHROUD, radius arm, RH	1	1959-68.
	14A6616	SHROUD, radius arm, LH	1	1959-68.
20	PMZ308	SCREW, shroud to body	2
21	LWZ203	WASHER, locking	2
22	PTZ1003	SCREW, self tapping, shroud to body	2
23	PWZ203	WASHER, plain	4
24	14A7091	PLUG, radius arm shroud	2
25	C-AJJ3313	BUMP STOP KIT, uprated	1	For fast road or competition use. Designed for Hydrolastic
				suspension; may be adapted for rubber cone suspension.

Rear Hubs
Parallel Bearing Hubs
1959-84, All Models Except Cooper S and 1275 GT
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
26	21A2023	HUB ASSEMBLY	2	Not Cooper.
	21A1389	HUB ASSEMBLY	2	Cooper. Also 1970-74, Switzerland.
27	21A2064	STUD, wheel	8	Included in 21A2023 hub assembly.
	ATA7085	STUD, wheel	8	Included in 21A1389 hub assembly.
28	GHK1352	WHEEL BEARING KIT, with seal	2
29	GHB116	WHEEL BEARING, original type without integral spacer	4
	GHB212	WHEEL BEARING, later type with integral spacer	4	Included in GHK1352 kit.
30	2A7354	SPACER, for original type wheel bearings	2
31	GHS102	SEAL, oil, hub	2	Included in GHK1352 kit.
32	BTA672	WASHER, stub axle	2
33A	NL610041	NUT, hub to stub axle, RH (RH thread)	1
	FNN2410	NUT, hub to stub axle, LH (LH thread)	1
33B	ZPS415	SPLIT PIN, hub nut	2
34	ATB4098	CAP, grease	2

Tapered Bearing Hubs
1963-80, Cooper S and 1275 GT
1984 On, All Models
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
35	21A1277	HUB ASSEMBLY	2	1963-80, Cooper S and 1275 GT.
	RLH10021	HUB ASSEMBLY	2	1984 on, all models except 13" wheels.
	RLH101070	HUB ASSEMBLY	2	1994 on, 13" wheels (Silverstone, Sport Pack, Cooper Sport and Knightsbridge).
36	21A1278	STUD, wheel	8	Included in 21A1277 hub assembly.
	RLJ10001	STUD, wheel	8	Included in RLH10021 hub assembly.
	RLJ100060	STUD, wheel	8	Included in RLH101070 hub assembly.
37	GHK1548	WHEEL BEARING KIT, with seal	2
	GHK1548P	WHEEL BEARING KIT, with seal	2	Non-genuine.
38	GHB147	WHEEL BEARING KIT, with spacer	2	Included in GHK1548 kit.
39	GHS102	SEAL, oil, hub	2	Included in GHK1548 kit.
	GHS134	SEAL, oil, hub, steel reinforced	2	Cooper S and 1275 GT; may be replaced by GHS102.
40	BTA672	WASHER, stub axle	2
41A	NL610041	NUT, hub to stub axle, RH (RH thread)	1
	FNN2410	NUT, hub to stub axle, LH (LH thread)	1
41B	ZPS415	SPLIT PIN, hub nut	2
42	ATB4098	CAP, grease	2
43	21A1292	WHEEL SPACER, 5/16" thick	2	Use if required with 10" wheels.
	RYF100170	WHEEL SPACER, 8mm thick	2	Silverstone model with 13" wheels.

A range of wheel spacer kits are also available, providing alternative thicknesses to suit your Mini's requirements:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
	WSK005	WHEEL SPACERS, pair, 5mm thick	A/R
	WSK038	WHEEL SPACERS, pair, 3/8" thick	A/R	Kit includes 8 longer wheel studs.
	WSK034	WHEEL SPACERS, pair, 3/4" thick	A/R	Kit includes 8 longer wheel studs.
	WSK01	WHEEL SPACERS, pair, 1" thick	A/R	Kit includes 8 longer wheel studs.

Rubber Cone Suspension
All Saloons 1959-64. 850 and 1000 Saloons 1969-71; All Saloons and Cabriolets 1971 On.
All Travellers, Clubman Estates, Vans and Pick Ups.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
44	FAM3968	CONE, spring, rubber, standard	2
	FAM3968P	CONE, spring, rubber, standard	2	Very high quality non-genuine item.
	C-STR687	CONE, spring, rubber, uprated	2	For fast road or competition use.
45	RXB100040	BUMP STOP, cone	2	1992 on, uprated suspension. Use to obtain clearance for larger wheels and tyres.
46	2A150	NUT, bump stop	2	1992 on, uprated suspension.
47	2A7375	STRUT, steel (also known as 'trumpet')	2	Saloon models, 1959-61.
	21A1683	STRUT, aluminium (also known as 'trumpet')	2	Saloon models, 1961-84; may be used on earlier models.
	21A138	STRUT, steel (also known as 'trumpet')	2	Traveller, Van and Pick Up, 1960-61.
	21A1684	STRUT, aluminium (also known as 'trumpet')	2	Traveller, Clubman Estate, Van and Pick Up, 1961 on; Saloon and Cabriolet, 1984 on (may be used in pairs on earlier models).
48	21A463	WASHER, special	2	Models with steel struts, 1959-61.
	21A1845	WASHER, spacing strut	2	1275 GT; also use on other models to raise suspension height.
49	GSV1118	KNUCKLE JOINT ASSEMBLY	2
50	21A425	COVER, dust	2	Included in knuckle joint assembly.
51	21A423	SOCKET, joint	2	Included in knuckle joint assembly.
52	GSA971389	SHOCK ABSORBER ASS'Y, standard	2
	GSA971116	SHOCK ABSORBER ASS'Y, Koni, uprated	2	1997 on, Sports Pack models.
53	801794	SHOCK ABSORBER ASS'Y, Koni, standard height	2
	801795	SHOCK ABSORBER ASS'Y, Koni, lowered suspension	2
54	GM2	SHOCK ABSORBER ASS'Y, Spax, standard height	2	Saloon and Cabriolet models.
	GM12	SHOCK ABSORBER ASS'Y, Spax, lowered suspension	2	Saloon and Cabriolet models.
	GM3	SHOCK ABSORBER ASS'Y, Spax, standard height	2	Traveller, Clubman Estate, Van and Pick Up.
55	21A1230	BUSH, lower, shock absorber, standard	2
56	SSB0010	BUSH, lower, shock absorber, Spax	2
57	21A504	DISTANCE PIECE, lower bush	2
58	AJD7162	WASHER, lower bush retaining	4
59	LNZ206	NUT, nyloc, lower shock absorber mounting	2
60	21A2325	WASHER, lower, upper shock absorber mounting	2
61	21A1314	BUSH, lower, upper shock absorber mounting	2
62	GZS1477	BUSH, upper, upper shock absorber mounting	2
63	21A639	WASHER, upper, upper shock absorber mounting	2
64	LNZ206	NUT, nyloc, upper shock absorber mounting	2
65	21A640	CAP, rubber, upper shock absorber mounting	2
66	21A1102	DISTANCE PIECE, upper bushes	2	Not required with later shock absorbers and all replacements.

Adjustable Suspension Units
Manufactured in the UK exclusively for Somerford Mini Ltd., These are high quality struts giving a very fine degree of ride height adjustment by the simple use of two spanners, making them ideal not only for 1959-91 Saloons but also for post-1992 Saloons, plus Travellers, Vans and Pick Ups - models on which rear adjustment would not have been easy using the older, traditional adjustable suspension systems. They fit standard cones and knuckle joints.

Sold individually, the adjustable suspension units are available in two specifications: standard or fast road/competition, the latter fitted with a grease nipple and employing a larger cone seat to increase the spring rate.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
	ASU001	ADJUSTABLE SUSPENSION UNIT, front	2	Standard specification.
	ASU003	ADJUSTABLE SUSPENSION UNIT, front	2	Fast road/competition specification.
67	ASU002	ADJUSTABLE SUSPENSION UNIT, rear	2	Standard specification.
	ASU004	ADJUSTABLE SUSPENSION UNIT, rear	2	Fast road/competition specification.

Moulton Smootha Ride Suspension Kit
Conceived by Dr. Alex Moulton, designer of the original Mini rubber cone and Hydrolastic suspension systems, Smootha Ride provides the simplicity of rubber cones but with an extraordinarily smooth, comfortable ride, more akin to the Hydrolastic system. It makes the car easier to drive, too.

The kit includes Moulton suspension cones for front and rear, adjustable suspension units for front and rear, negative camber and track brackets for the rear plus fitting and adjusting instructions. We recommend the use of our Koni standard height shock absorbers with this system.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
68	MOULTON	SMOOTHA RIDE SUSPENSION KIT	1

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Rear suspension - rubber cone

GREASE NIPPLE-STRAIGHT-1/4'' UNF

WASHER-SPRING,1/2''

NUT-1/2'' UNF HIGH TENSILE-(GRADE 3)

SEALING RING-RADIUS ARM/ TOP SUSPENSION ARM

WASHER-THRUST-TOP ARM/ RADIUS ARM OUTER END

WHEEL STUD-DRUM,COOPER & 'S' FRONT/STD REAR 40mm overall

GROMMET-WIPER HOLE, RADIUS ARM SHROUD ETC.

SHROUD-RADIUS ARM NIPPLE -LH

SHROUD-RADIUS ARM NIPPLE -RH

SCREW-SELF TAPPING, PAN HEAD No.10 x 3/8''

USE: WL700101

WASHER-PLAIN 10/32'' LARGE OD.

We accept