Fresh air and demister ducts 1959-69

Fresh Air Ducts
1959-63 Square Fresh Air Heater
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	14A9979	HOSE, fresh air, heater to fan, wire reinforced type	1	RHD; 36" long.
	14A9980	HOSE, fresh air, heater to fan, wire reinforced type	1	LHD; 29" long.
2	14A9983	HOSE, fresh air, fan to intake tube, wire reinforced type	1	12" long.
3	24A2195	GROMMET, hose through dash	1
4	14A9982	CLIP, fresh air hose to body	1
5	PTZ804	SCREW, self tapping, clip to body	1
6	HCS168	CLIP, Supergrip, fresh air hose	A/R
7	14A9984	TUBE ASS'Y, fresh air intake	1
8	17H1607	SEAL, air valve	1
9	17H1609	ARM AND SPINDLE, air valve	1
10	17H1608	WASHER, bearing	2
11	27H1193	CLAMP, control cable to intake tube	1
12	53K126	SCREW, clamp to intake tube	1
13	WF702101	WASHER, shakeproof	1
14	PTZ804	SCREW, self tapping, intake tube to body	2
15	27H1967	CABLE ASS'Y, fresh air control	1	1959-61.
16	27H2279	KNOB, control cable	1	1959-61.
17	17H823	NUT, locking, round	1	1959-61.
18	17H824	NUT, locking, hexagonal	1	1959-61.
19	17H825	WASHER, locking	1	1959-61.
20	14A9986	CABLE ASS'Y, fresh air control	1	1961-63.
21	24A1882	GROMMET, cable through dash	1
22	6K772	SLEEVE, rubber, cable	1
23	24G1482	TRUNNION, cable to air valve	1
24	53K1016	SCREW, cable clamping	1

1963-69 Fresh Air Heaters and Fresh Air Ventilators
Except 1966-69 Cooper S
From 1963 a new design of fresh air heater was specified with a 2.8kW fan inside it in standard form. Also available as an option, or standard fitment for
colder climates, was a similar heater with a 4kW blower unit mounted in the engine bay rather than within the heater casing. However, the 4kW unit was
never specified on the Cooper S, because of lack of space in the engine bay caused by brake servo fitment.
Fresh air hoses changed from the soft-feel wire reinforced type to more rigid moulded PVC in early 1967, not long before the end of Mini Mk I production.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
25	24A1256	HOSE, fresh air, heater to intake tube, wire reinforced	1	1963-67. Units with 2.8kW internal fan; 45" long.
	24A1975	HOSE, fresh air, heater to intake tube, moulded PVC	1	1967-69. Units with 2.8kW internal fan; 45" long.
26	24A1409	HOSE, fresh air, heater to fan, wire reinforced	1	1963-67. Units with 4kW external fan; 32" long.
	24A1976	HOSE, fresh air, heater to fan moulded PVC	1	1967-69. Units with 4kW external fan; 32" long.
27	24A1410	HOSE, fresh air, fan to intake tube, wire reinforced	1	1963-67. Units with 4kW external fan; 13" long.
	24A1977	HOSE, fresh air, fan to intake tube, moulded PVC	1	1967-69. Units with 4kW external fan; 13" long.
28	24A2195	GROMMET, hose through dash	1
29	14A9982	CLIP, fresh air hose to body	1
30	PTZ804	SCREW, self tapping, clip to body	1
31	HCS156	CLIP, Supergrip, fresh air hose	2/4
	GHC2228	CLIP, Jubilee, fresh air hose	2/4	Alternative.
32	24A1967	TUBE, fresh air intake, plastic	1	1966-69.
Before 1966 the fresh air intake tube on the front panel was metal, rather than plastic. The metal tube was never (and still isn't) offered as a service part.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
33	DMP2835	RIVET, tube to front panel	2

The face-level air vents fitted to 1967-69 Riley and Wolseley models have not been available for many years; however other associated items for the face-level ventilation system found on these models may be purchased:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
34	ALA6292	SEAL, vent housing	2	1967-69 Riley Elf and Wolseley Hornet.
35	PMZ310	SCREW, housing to fascia	8	1967-69 Riley Elf and Wolseley Hornet.
36	WL700101	WASHER, locking	8	1967-69 Riley Elf and Wolseley Hornet.
37	ALA6307	HOSE, vent to housing, original	2	1967-69 Riley Elf.
	JBB100550	HOSE, vent to housing, replacement	2	1967-69 Riley Elf.
38	ALA6306	HOSE, housing to intake, original	2	1967-69 Riley Elf and Wolseley Hornet.
	EAM7097	HOSE, housing to intake, replacement	2	1967-69 Riley Elf and Wolseley Hornet.
39	GHC1622	CLIP, jubilee, fresh air hose	4	1967-69 Riley Elf and Wolseley Hornet.
40	ALA6299	CLIP, hose to body	2	1967-69 Riley Elf and Wolseley Hornet.
	JCG10001	CLIP, hose to body (later alternative)	2	1967-69 Riley Elf and Wolseley Hornet.
41	FNZ103	NUT, clip to body	2	1967-69 Riley Elf and Wolseley Hornet.
42	WL700101	WASHER, locking	2	1967-69 Riley Elf and Wolseley Hornet.

1966-69 Fresh Air Heaters and Fresh Air Ventilators
Cooper S
Between 1966 and 1969 the Cooper S received revised fresh air ducting. This featured a reduced diameter hose in the engine bay, giving increased clearance
between it and the brake servo. Actually for 'reduced' you can read 'restricted', for the revised ducting certainly did not exactly improve the Mini's mediocre
heating and ventilating performance! If you are careful with installation, there is sufficient space for standard diameter ducting if that's what you would
rather fit.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
43	14A9980	HOSE, fresh air, heater to dash	1	29" long.
The above hose is the original wire-reinforced type (it never changed over to PVC in 1967 in line with other Mini models); it may however be replaced by the later 1970s style PVC hose if required; please contact us for details.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
44	24A2061	REDUCING ADAPTOR, fresh air hose, dash	1
45	24A2062	HOSE, fresh air, dash to intake tube	1
46	24A2060	REDUCING ADAPTOR, fresh air hose, intake tube	1
47	HCS156	CLIP, Supergrip, fresh air hose	3
	GHC2228	CLIP, Jubilee, fresh air hose	3	Alternative.
48	HCS144	CLIP, Supergrip, fresh air hose	2
	GHC1622	CLIP, Jubilee, fresh air hose	2	Alternative.
49	24A1967	TUBE, fresh air intake	1
50	DMP2835	RIVET, tube to front panel	2

Demister Ducts and Hoses
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
51	24A1331	DUCT, demister, RH	1	1959-69; to fix use machine screws.
	24A1332	DUCT, demister, LH	1	1959-69; to fix use machine screws.
52	24A2180	DUCT, demister, RH	1	1963-69; to fix use self tapping screws.
	24A2181	DUCT, demister, LH	1	1963-69; to fix use self tapping screws.
The above RH and LH demister ducts may be replaced by the later 1970s onwards unhanded duct if required:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
53	CZH624	DUCT, demister, not handed	2	Later alternative; to fix use self tapping screws.
54	14A9949	BEZEL, demister duct	2	For vinyl covered upper fascias.
55	PMP306	SCREW, machine, duct to body	4	1959-69; for untrimmed upper fascias.
56	PTP1004	SCREW, self tapping, duct to body	4	1963-69; for untrimmed upper fascias.
57	RMP307	SCREW, machine, duct and bezel to body	4	1961-69; for vinyl covered upper fascias.
58	27H1979	HOSE, demister, 36" length	2	1959-67; cut to fit heater type fitted.

The PVC demister hose 24A2751 may be used in place of the original type for all 1959-67 heaters and fresh air ventilators except for the 1959-63 RHD square bodied fresh air heater, for which it would be too short:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
	24A2751	HOSE, demister, 30" length	2	1967-69; PVC type. Cut to fit heater type fitted.

The 1963-69 metal-bodied fresh air heaters and fresh air ventilators were fitted with covers for the demister hoses. These were not used on the plastic-bodied fresh air heaters and ventilators of 1968-69.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
59	24A1289	COVER, demister hose, RH	1	1963-69 metal-bodied fresh air heaters and ventilators.
60	24A1290	COVER, demister hose, LH	1	1963-69 metal-bodied fresh air heaters and ventilators.
61	24A1453	COVER, demister hose, RH	1	RHD, required if steering lock is fitted.
62	24A1454	COVER, demister hose, LH	1	LHD, required if steering lock is fitted.
63	PTZ602	SCREW, self tapping, cover to heater/ventilator	4

View As

Compare Products

Sort by:

Show items

Items 61 to 67 of 67 total

1 2 3 4 5 6

Part No: 27H1193

In Stock

CLAMP-CONTROL CABLE OUTER TO HEATER VALVE-'59-'74

Required Quantity: 1

£1.56 inc VAT £1.30 exc VAT

Add to Basket

Select to compare

Part No: PMZ310

In Stock

SCREW-PAN HEAD-10 UNF x 5/8''

Required Quantity: 8

£0.38 inc VAT £0.32 exc VAT

Add to Basket

Select to compare

Part No: RMP307

In Stock

SCREW-CHROME,RAISED COUNTERSUNK 10/32 UNF x 7/16''

Required Quantity: 4

1963 on.

£0.98 inc VAT £0.82 exc VAT

Add to Basket

Select to compare

Part No: 53K1016

In Stock

SET SCREW-8 UNC x 3/8

Required Quantity: 1

£0.50 inc VAT £0.42 exc VAT

Add to Basket

Select to compare

Part No: WF702101

No Longer Available

USE: LWZ403

Required Quantity: 1

£0.00 inc VAT £0.00 exc VAT

Add to Basket

Select to compare

Part No: FNZ103

In Stock

NUT-10/32" UNF 5/16'' DIA. HEAD

Required Quantity: 2

£0.31 inc VAT £0.26 exc VAT

Add to Basket

Select to compare

Part No: WL700101

In Stock

WASHER-SPRING 10/32''

Required Quantity: 8

£0.17 inc VAT £0.14 exc VAT

Add to Basket

Select to compare

Items 61 to 67 of 67 total

1 2 3 4 5 6

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Fresh air and demister ducts 1959-69

CLAMP-CONTROL CABLE OUTER TO HEATER VALVE-'59-'74

SCREW-PAN HEAD-10 UNF x 5/8''

SCREW-CHROME,RAISED COUNTERSUNK 10/32 UNF x 7/16''

SET SCREW-8 UNC x 3/8

USE: LWZ403

NUT-10/32" UNF 5/16'' DIA. HEAD

WASHER-SPRING 10/32''

We accept