Brake systems - single line 1959-75

Note: This system is applicable to right hand drive and left hand drive 1959-75 models.

Brake Pipes
Pre-Assembled Copper Brake Pipe Kits
Each kit listed here includes a car set of pre-assembled copper brake pipes, which do not corrode and are easy to fashion with the correct bends to route them around the car. All kits are intended for saloon fitment. For Travellers, Estates, Vans and Pick Ups, please contact us - we will substitute a longer front to rear pipe in the appropriate saloon kit if required.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	GB4991	BRAKE PIPE KIT, copper, car set	1	RHD, rubber cone suspension; drum or disc brakes, without servo.
	GL4991	BRAKE PIPE KIT, copper, car set	1	LHD, rubber cone suspension; drum or disc brakes, without servo.
	GB4992	BRAKE PIPE KIT, copper, car set	1	RHD, rubber cone suspension; drum or disc brakes, with servo.
	GL4992	BRAKE PIPE KIT, copper, car set	1	LHD, rubber cone suspension; drum or disc brakes, with servo.
	GB5001	BRAKE PIPE KIT, copper, car set	1	RHD, Hydrolastic suspension; drum or disc brakes, without servo.
	GL5001	BRAKE PIPE KIT, copper, car set	1	LHD, Hydrolastic suspension; drum or disc brakes, without servo.
	GB5002	BRAKE PIPE KIT, copper, car set	1	RHD, Hydrolastic suspension; drum or disc brakes, with servo.
	GL5002	BRAKE PIPE KIT, copper, car set	1	LHD, Hydrolastic suspension; drum or disc brakes, with servo.

Pre-Assembled Brake Pipes
Alternatively, pre-assembled individual brake pipes can be supplied. If you order one of the part numbers below, you will receive a brake pipe assembly made from Cunifer, a superior material which bends to shape easily, doen't work harden and subsequently split and does not corrode. If desired, however, we will supply pipes in original Bundy material or copper - for either of these, please contact us.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
2	GPP18AA	BRAKE PIPE, master cylinder to three way union	1	RHD, cone suspension, union fitted to lower dash; no servo.
	GPP12AA	BRAKE PIPE, master cylinder to three way union	1	RHD, cone suspension, union fitted to engine steady bracket; no servo.
	GPP14AA	BRAKE PIPE, master cylinder to three way union	1	RHD, Hydrolastic suspension, no servo.
	GPP32AA	BRAKE PIPE, master cylinder to three way union	1	LHD, no servo.
	GPP32AA	BRAKE PIPE, master cylinder to servo	1	RHD, servo fitted.
	GPP44AA	BRAKE PIPE, master cylinder to servo	1	LHD, servo fitted.
	GPP26AA	BRAKE PIPE, servo to three way union	1	RHD and LHD, servo fitted.
3	GPP12AA	BRAKE PIPE, three way union to RH front hose	1	When union fitted to lower dash.
	GPP18AA	BRAKE PIPE, three way union to RH front hose	1	When union fitted to engine steady bracket.
	GPP26AA	BRAKE PIPE, three way union to hydraulic booster	1	1961-62 Cooper models only.
	GPP14AA	BRAKE PIPE, hydraulic booster to RH front hose	1	1961-62 Cooper models only.
4	GPP44AA	BRAKE PIPE, RH front hose to LH front hose	1	All models.
5	GPP10AA	BRAKE PIPE, bridging between front wheel cylinders	2	1964-75 models with front drum brakes (twin leading shoes).
6	GPP102AA	BRAKE PIPE, three way union to rear subframe union	1	Saloon models.
	GPP106AA	BRAKE PIPE, three way union to rear subframe union	1	Traveller, Clubman Estate, Van and Pick Up models.
7	GPP6AC	BRAKE PIPE, rear union (valve) to RH rear hose	1	Rubber cone suspension. Not 1275 GT, 1974-75.
	GPP6AC	BRAKE PIPE, rear union (three way) to RH rear hose	1	Rubber cone suspension. 1275 GT, 1974-75.
	GPP8AC	BRAKE PIPE, rear union (valve) to RH rear hose	1	Hydrolastic suspension.
8	GPP24AC	BRAKE PIPE, rear union (valve) to LH rear hose	1	Rubber cone suspension. Not 1275 GT, 1974-75.
	GPP26AC	BRAKE PIPE, rear union (three way) to LH rear hose	1	Rubber cone suspension. 1275 GT, 1974-75.
	GPP26AC	BRAKE PIPE, rear union (valve) to LH rear hose	1	Hydrolastic suspension.
9	GPP10AC	BRAKE PIPE, rear hose to rear wheel cylinder	2	Rubber cone suspension.
	GPP8AC	BRAKE PIPE, rear hose to rear wheel cylinder	2	Hydrolastic suspension.

Brake Pipe Components
If you have flaring and pipe bending tools to hand, individual components to make up your own brake pipes are also available:
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
10	CNF316	BRAKE PIPE, superior cunifer material, per metre	A/R	Will require cutting and flaring to fit.
	HCP316	BRAKE PIPE, copper material, per metre	A/R	Will require cutting and flaring to fit.
11	TM606031	TUBE NUT, steel, pipe union, 3/8 UNF, male	A/R	Fitting code 'A' in brake pipe part numbers.
	HU1	TUBE NUT, brass, pipe union, 3/8 UNF, male	A/R	Fitting code 'A' in brake pipe part numbers.
12	TN606031	TUBE NUT, steel, pipe union, 3/8 UNF, female	A/R	Fitting code 'C' in brake pipe part numbers.
	HU1A	TUBE NUT, brass, pipe union, 3/8 UNF, female	A/R	Fitting code 'C' in brake pipe part numbers.

Brake Hoses
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
13	GBH170	BRAKE HOSE, rubber, front	2	Drum braked models.
	GBH249	BRAKE HOSE, rubber, front	2	Disc braked models.
14	GBH250	BRAKE HOSE, rubber, rear	2

We also stock stainless steel braided hoses - much more durable than the rubber originals, and giving a more positive feel to the brake pedal.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
15	BHS004	BRAKE HOSE SET, stainless steel braided, car set	1	Car set of four brake hoses; for drum or disc braked models.
16	BHS005	BRAKE HOSE SET, stainless steel braided, rear	1	Set of two braided rear brake hoses.
17	21A228	NUT, locking RH front hose to subframe	1
18	2K8686	NUT, locking LH front hose to subframe	1
19	WE600101	WASHER, shakeproof	2
20	3H2287	WASHER, sealing, front hose to front brake	2
21	NT606041	NUT, thin, rear hose to mounting	4
22	LWZ606	WASHER, shakeproof	6

For those converting their Mini to Metro-type four pot callipers and ventilated discs, we can supply an easy-to-fit and safe remedy to the problem of how to plumb in the dual line callipers when there's only one brake pipe to each front brake on a Mini. Our set of stainless steel braided hoses replace the standard front brake hoses and at the same time bridge the gap between the two ports on each calliper, removing the need to replicate the complicated dual line to each calliper set up of the Metro (or indeed the ERA Mini Turbo, which used similar callipers).
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
23	BHS003	BRAKE HOSE SET, four pot calliper conversion	1

Connectors and Valves
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
24	3H2424	THREE WAY UNION, front	1	Alternatively fitted to lower dash or engine steady bracket.
25	SH604091	SCREW, union to body	1	When union fitted to lower dash.
26	LWZ204	WASHER, locking	1	When union fitted to lower dash.
27	21A1116	BRACKET, angle	1	When union fitted to engine steady bracket.
28	SH604091	SCREW, union to bracket	1	When union fitted to engine steady bracket.
29	LWZ204	WASHER, locking	1	When union fitted to engine steady bracket.
30	FNZ104	NUT	1	When union fitted to engine steady bracket.
31	11D5263	CONNECTOR, banjo, RH front hose	1
32	7H7995	BOLT, banjo	1	Accepts brake light switch.
33	3H550	WASHER, sealing, banjo connector, upper	1
34	233220A	WASHER, sealing, banjo connector, lower	1
35	21A1774	VALVE ASS'Y, pressure regulating	1	1959-67, all models.
	21A2031	VALVE ASS'Y, pressure regulating	1	1967-75, except Cooper, Cooper S and 1275 GT.
	21A1774	VALVE ASS'Y, pressure regulating	1	1967-74, Cooper, Cooper S and 1275 GT.
36	3H2424	THREE WAY UNION, rear	1	1974-75, 1275 GT.
37	GRK6002	REPAIR KIT, valve	1
38	17H7630	PLUG, screwed, valve	1
39	27H6620	SPRING, valve	1	For 21A1774 valve.
	37H2009	SPRING, valve	1	For 21A2031 valve.
40	SH604041	SCREW, valve to rear subframe	1
41	SH604091	SCREW, union to rear subframe	1
42	LWZ204	WASHER, locking	1
43	FNZ104	NUT	1

Brake Light Switches
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
44	2A5740	SWITCH, brake light, hydraulic, with screw terminals	1	1959-63.
The following C16062A switch may be used to replace the screw terminal switch by fitting a pair of 1/4" Lucar connectors (RTC220A) to the wiring.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
45	C16062A	SWITCH, brake light, hydraulic, with Lucar terminals	1	1963-75.

Clips
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
46	11K9181	CLIP, edge, pipe to front subframe	2
47	11G2013	CLIP, booster pipe to inner wing	1	1961-62, Cooper models.
48	2H400	CLIP, servo pipes to inner wing	1	1963-74, Cooper S and 1275 GT.
49	PTZ1003	SCREW, self tapping, clip to inner wing	1	1963-74, Cooper S and 1275 GT.
50	6K751	SLEEVE, rubber, servo pipes	2	1963-74, Cooper S and 1275 GT.
51	21A64	CLIP, brake and clutch pipes to dash	2	LHD models.
52	FNZ103	NUT, clip to dash	2	LHD models.
53	WL700101	WASHER, locking	2	LHD models.
54	6K751	SLEEVE, rubber, front to rear brake pipe	9

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Brake systems - single line 1959-75

BRAKE HOSE-RUBBER. REAR- ALL MODELS. GENUINE ROVER/AP

BRAKE HOSE-RUBBER. FRONT-DISC BRAKE MODELS. GENUINE ROVER/AP

BRAKE HOSE SET-4 POT CALIPER CONVERSION

USE: 2H400

SLEEVE-RUBBER-BRAKE/CLUTCH PIPE PROTECTION

CLIP-SERVO PIPES TO INNER WING COOPER 'S' & GT-'63-'74

CLIP-BRAKE BOOSTER PIPE TO INNER WING-'61-'62 COOPER

CLIP-BRAKE PIPE TO SUBFRAME/DRIVING LAMP SUPPORT,ETC

USE: 13H1731

USE: 13H1731- FIT LUCAR CONNECTORS TO HARNESS

SET SCREW-1/4'' UNF x 1 1/8''

SPRING FOR 21A2031 PRESSURE REGULATING VALVE

We accept