Van & pickup

Bumpers
Front Bumper, Van and Pick Up
14A6779 is the original Mini bumper, which initially used a 5 bolt fixing method. All other bumpers listed here are the later style introduced at the end of the 1980s, which may be fitted easily to an earlier Mini. The changes from the original style include a more simple 3 bolt fixing method (actually, this feature was introduced several years earlier) and the 'spooned' shaping of the bumper ends. The later bumper is available in stainless steel (stainless steel replaced most chromed finishes on exterior fittings on cars as the use of unleaded fuel became more widespread - the fumes can discolour chrome). Later style bumpers on an earlier Mini will satisfy all but the most pedantic of enthusiasts.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	14A6779	BUMPER ASSEMBLY, front, chromed	1	1961-79 approx.
	DPB10166	BUMPER ASSEMBLY, front, stainless	1	Alternative to chrome finish.
	DPB10165P	BUMPER ASSEMBLY, front, stainless	1	Alternative to chrome finish; non-genuine.
	DPB10085	BUMPER ASSEMBLY, front, black	1	1980 approx. on.
	DPB10085P	BUMPER ASSEMBLY, front, black	1	1980 approx. on; non-genuine.
2	14A7304	BOLT, special, bumper to body	5/3	Included in bumper assy.; early 14A6779 uses 5, other bumpers use 3.
3	14A6779FK	FITTING KIT, bumper	1	Includes 3 each nut and washers.
4	PWZ204	WASHER, plain	5/3	14A6779 uses 5, all other bumpers use 3.
5	LWZ204	WASHER, locking	5/3	14A6779 uses 5, all other bumpers use 3.
6	FNZ104	NUT	5/3	14A6779 uses 5, all other bumpers use 3.
7	24A2618	END CAPPING, safety, RH	1	1967-80, Germany only.
	24A2619	END CAPPING, safety, LH	1	1967-80, Germany only.
8	RU608123	RIVET, end capping fixing	4	1967-80, Germany only.

Optional Front Over-riders, Van and Pick Up, 1960-82
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
9	14A8738	OVER-RIDER, stainless	2
10	14A8738FK	FITTING KIT, over-riders	1	Includes fixings for 2 over-riders.
11	37H9871	SEATING STRIP, over-rider, 5cm length	4	2 off 5cm lengths required per over-rider.
12	SH605101	SCREW, clamping over-rider to bumper	2
13	14A7598	CLAMP, over-rider to bumper	2

Rear Bumper, Van 1960 on and Pick Up 1969 On
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
14	14A7550	BUMPER ASSEMBLY, rear, chromed	2	Van 1960-79 approx.; Pick Up 1969-79 approx.
	EAM9248	BUMPER ASSEMBLY, rear, black	2	Van and Pick Up 1980 approx. on.
15	14A7304	BOLT, special, bumper to body	4	Included in bumper assembly.
16	PWZ204	WASHER, plain	4
17	LWZ204	WASHER, locking	4
18	FNZ104	NUT	4

Rear Bumper, Pick Up 1961-69
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
19	14A7795	BUMPER ASSEMBLY, rear	1
20	14A7304	BOLT, special, bumper to body	7	Included in bumper assembly.
21	PWZ204	WASHER, plain	5
22	LWZ204	WASHER, locking	5
23	FNZ104	NUT	5
24	14A7751	BRACKET, rear bumper	2
25	LWZ504	WASHER, shakeproof	2
26	FNZ104	NUT	2
27	PMZ306	SCREW, pan head, bracket to body	2
28	LWZ403	WASHER, shakeproof	2

Sill and Wheel Arch Finishers
1960-70 Models
Mini Vans and Pick Ups used body coloured steel finishers applied to the sill seams and wheel arch edges up to 1970. These finishers were to the same style as those used on the earliest standard specification Mini saloons of 1959-61, adapted to suit the different body type. The front wheel arch finishers were shortened to account for the brake cooling cut-outs in the front panel from 1964.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
29	14A7098	FINISHER, primed, front wheel arch, RH	1	1960-64 models without brake cooling cut-outs on front panel.
	14A7099	FINISHER, primed, front wheel arch, LH	1	1960-64 models without brake cooling cut-outs on front panel.
	24A1821	FINISHER, primed, front wheel arch, RH	1	1964-70 models with brake cooling cut-outs on front panel.
	24A1822	FINISHER, primed, front wheel arch, LH	1	1964-70 models with brake cooling cut-outs on front panel.
30	14A7100	FINISHER, primed, sill, RH	1
	14A7101	FINISHER, primed, sill, LH	1
31	14A7308	FINISHER, primed, rear wheel arch, RH	1
	14A7309	FINISHER, primed, rear wheel arch, LH	1
32	GFK7515	CLIP, finishers to body	54

1971 on Models
From 1971 onwards, a simple 'cut to fit' plastic extrusion was employed, initially in bright finish but changing to black in 1980.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
33	47H9614	FINISHER, plastichrome, sill and wheel arches	2	1971-80, flat profile Sold pre-cut.
	GZF105	FINISHER, sill and wheel arches, plastichrome	2	1971-80, alternative fluted profile. Sold pre-cut.
	GZF105P	FINISHER, sill and wheel arches, plastichrome	2	1971-80, alternative fluted profile. Sold pre-cut. Non-genuine.
	GZF108OE	FINISHER, black, sill and wheel arches	2	1980 on, flat profile. Sold pre-cut.
	GZF108	FINISHER, black, sill and wheel arches	2	1980 on, alternative fluted profile. Sold pre-cut.
34	RA608123	RIVET, finishers to wheel arch ends, bright	4
	RA608185	RIVET, finishers to wheel arch ends, black	4

Number Plate Supports
Front Number Plate Support, Van and Pick Up 1960 - 1969
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
35	14A8455	SUPPORT, front number plate	1
36	SH604051	SCREW, support to body	2
37	LWZ204	WASHER, locking	2
38	FNZ104	NUT	2

Rear Number Plate Support, Van
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
39	14A7552	SUPPORT, rear number plate	1
40	PMZ412	SCREW, pan head, support to bracket	2
41	PWZ104	WASHER, plain	2	1960-69.
42	LWZ404	WASHER, shakeproof	2	1960-69.
43	FNZ104	NUT	2	1960-69.
44	GHF1030	NUT, nylon	2	1969 on.
45	14A8366	BRACKET, support to body	2
46	PMZ306	SCREW, pan head, bracket to body	2
47	LWZ403	WASHER, shakeproof	2
48	CTZ1004	SCREW, c'sunk, self tapping, bracket to body	2

Rear Number Plate Support, Pick Up
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
49	14A6468	SUPPORT, rear number plate	1
50	14A6466	BRACKET, hinge, RH	1
51	14A6467	BRACKET, hinge, LH	1
52	RMZ308	SCREW, countersunk, bracket to boot lid	6
53	LWZ303	WASHER, shakeproof, countersunk	6
54	2A4030	BUFFER, number plate support	1	Different parts books say 2A4030 or 2A4082. I'm sure it isn't 4082 - that's a suspension bump stop for Midget, and it'd be way too big.

Roof Finishers
Van, 1980 on
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
55	YGA1100	FINISHER, drip rail, front RH, black	1
56	YGA1101	FINISHER, drip rail, front LH, black	1
57	YGA1102	FINISHER, drip rail, rear, black	1
58	DBE10006PMD	COVER, drip rail finisher joint, black	3

Pick Up, 1980 on
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
59	YGA2754	FINISHER, drip rail, RH, black	1
60	YGA2755	FINISHER, drip rail, LH, black	1
61	DBE10006PMD	COVER, drip rail finisher joint, black	1

Badges
1960-67 Models
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
62	ADA3580	BADGE, bonnet, 'Morris'	1	Originally fixed with spire clips; now supplied with studs and nuts.
63	PFR108	SPIRE CLIP, badge to bonnet	2	For original badges only.
64	24G1201	BADGE, bonnet, 'Austin'	1
	24G1201P	BADGE, bonnet, 'Austin'	1	Non-genuine.
65	14A6837	SURROUND, 'Austin' bonnet badge	1
66	PFR104	SPIRE CLIP, badge to bonnet	3

1967-69 Models
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
67	ALA6510	BADGE, bonnet, Morris logo	1
68	ALA6512	BADGE, bonnet, Austin logo	1
69	ALA6516	SURROUND, bonnet badge	1
70	GFK7514	BLIND FIX, badge to bonnet	3

1969-79 Models
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
71	CZH1305	BADGE, bonnet, 'Mini' silver and blue shield	1	1969-75.
72	CZH3957	BADGE, bonnet, 'Mini' with Leyland logo	1	1976-78.
73	CZH4143	BADGE, bonnet, Leyland logo	1	1979.
74	GFK7514	BLIND FIX, badge to bonnet	3
75	CZH4166	BADGE ASSY., rear door or tailboard, 'Mini 95'	1	1976-79.
	CZH4166F	BADGE, foil only, 'Mini 95'	1	1976-79.
	CZH944B	PLINTH, chrome, rear door badge	1	Part of above rear door badge assembly.
76	GFK7514	BLIND FIX, badge to rear door or tailboard	2	1976-79.
77	CZH657	HOUSE BADGE, 'British Leyland', silver on blue	2	1969-71; self-adhesive. Applied to both A panels.
78	CZH2717	HOUSE BADGE, 'British Leyland', blue on silver	1	1972-75; push fixing. Applied to passenger's side A panel.
79	CZH1634	HOUSE BADGE, 'Mini'	2	Arab markets 1969-75; push fixing. Applied to both A panels.
80	GFK7514	BLIND FIX, push fixing type badge to A panel	2/4	Quantity increases for 'Mini' house badge.

1980 on Models
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
81	CZH4378	BADGE, bonnet, 'Mini' silver and black shield	1
82	GFK7514	BLIND FIX, badge to bonnet	3
83	BFP1246	BADGE AND PLINTH ASSY., radiator grille	1
84	JRC2287	BADGE, radiator grille, Austin Rover logo	1
85	CZH4377	CLAMP PLATE, plinth to radiator grille	1
86	WL105001	WASHER, locking	1
87	NH105041	NUT	1
88	PAM2429	BADGE, rear door or tailboard, 'Mini'	1
89	EAM7926	BADGE, rear door or tailboard, '95'	1

Wheel Arch Liner Kit
These snug-fitting moulded plastic front wheel arch liners protect the Mini’s vulnerable under wing, inner wing and door hinge pillar areas from paint damaging stone chips and moisture-retaining build up of road dirt. They fit all Mini bodies except Clubman.
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
90	WAL001	FRONT WHEEL ARCH LINER KIT	1	Includes two liners plus all fixings.

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Van & pickup

SCREW-RAISED COUNTERSUNK-10 UNF x 1/2''

WASHER SHAKEPROOF-COUNTERSUNK-EXT. TEETH-2BA

BADGE-REAR TAILGATE-'95' PICK-UP-'80 ON

NUT-M5 METRIC FINE

USE: WL700101

CLAMP PLATE-PLINTH TO GRILLE-VAN & PICK-UP '80 ON

BADGE & PLINTH-FRONT PANEL-VAN & PICKUP-'80 ON

BADGE-FOIL ONLY-'MINI 95'-PICK-UP-'76-'79 Gen BL

BADGE-TAILGATE-'MINI 95'-PICK-UP-'76-'79

FINISHER-GUTTER-BLACK-LH-PICKUP-'80 ON

FINISHER-GUTTER-BLACK-RH-PICK-UP-'80 ON

BUFFER-REAR NO. PLATE BACKING-PICK-UP

We accept