Body sealing hardware

Body Sealing Hardware
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
1	14A6733	SEATING PLATE, crossmember, RH	1	1959-67.
	ALA6505	SEATING PLATE, crossmember, RH	1	1967-88.
	CRC8664	SEATING PLATE, crossmember, RH	1	1988 on.
2	14A6734	SEATING PLATE, crossmember, LH	1	1959-71, not Hydrolastic suspension; accepts fuel pipe.
	ALA5557	SEATING PLATE AND ADAPTOR, crossmember, LH	1	1964-67, Hydrolastic suspension; accepts fuel pipe.
	ALA6599	SEATING PLATE AND ADAPTOR, crossmember, LH	1	1967-71, Hydrolastic suspension.
3	14A9976	BLANKING PLATE, dash crossmember	1	1959-67, required when heater is fitted.
	ALA7530	BLANKING PLATE, dash crossmember	1	1967-88, required when heater is fitted.
4	NAM8776	BLANKING PLATE, dash crossmember	1	1988 on, all RHD models; also earlier models without heater.
5	NAM8523	BLANKING PLATE, dash crossmember	2	1988 on, all LHD models.
6	NAM9197	GASKET, seating plate	1	For master cylinder side.
7	ALA6600	GASKET, blanking plate	1	For heater hose side.
8	31G396	BLANKING PLATE, clutch master cylinder hole	1	Automatic models.
9	31G279	GASKET, blanking plate	1	Automatic models.
10	SH605051	SCREW, plates to dash crossmember	4
11	LWZ205	WASHER, locking	4
12	FNZ105	NUT	4
13	14A9992	BLANKING PLATE, fresh air hole in dash	1	Not required when fresh air heater fitted.
14	14A9993	GASKET, blanking plate	1
15	36052Z	SCREW, self tapping, plate to dash upper	4
16	14A4476	COVER, Rotodip hole in seat brace	1	If required.
17	PTZ1004	SCREW, cover to seat brace	4
18	PFS310	NUT, spire	4

Seat Belt Mountings Blanking
(when seat belts not fitted)
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
19	14A9922	SCREW, tunnel, floor and centre pillar mounting holes	6
20	24A1356	SPACER, centre pillar mounting holes	2

Floor Sealing
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
21	14A6860	GAITER, gearlever	1	Direct gearchange models.
22	14A6861	PLATE, gearlever gaiter to floor	1	Direct gearchange models.
23	36052Z	SCREW, self tapping, plate to floor	4	Direct gearchange models.
24	ALA6494	PLATE, blanking remote gearlever hole in floor	1	Direct gearchange models, if required.
25	36052Z	SCREW, plate to floor	8	Direct gearchange models, if required.
26	14A9941	GAITER, gearlever, domed	1	Remote gearchange models, 1961-64.
27	22A608	GAITER, gearlever, convoluted	1	Remote gearchange models, 1964 on.
28	14A9942	PLATE, gearlever gaiter to floor	1	Remote gearchange models.
29	36052Z	SCREW, plate to floor	4	Remote gearchange models.
30	14A9943	PLATE, blanking gearlever hole in toeboard	1	Remote gearchange models.
31	36052Z	SCREW, plate to floor	7	Remote gearchange models.
32	CZH4278	GAITER, gearlever	1	Rod gearchange models, when outer gaiter not fitted.
33	PAM5130	GAITER, gearlever, inner	1	Rod gearchange models, when outer gaiter fitted.
34	FJL10016	GAITER, gearlever, outer, leather, black and red	1	Rod gearchange models, when fitted.
	FJL100480JCH	GAITER, outer, PVC, prussian blue	1	Rod gearchange models, when fitted.
	FJL101210RKX	GAITER, outer, PVC, stone beige/bright	1	Original fitment 1997 on.
	FJL101210WFE	GAITER, outer, PVC, grenadine red/chrome	1	Original fitment 40th Anniversary.
	FJL101210WFG	GAITER, outer, PVC, prussian blue/chrome	1	Original fitment 40th Anniversary.
	FJL101210CAC	GAITER, outer, PVC, tartan red	1	Original fitment Classic 2000 Seven.
The leather/PVC gaiter was also supplied in other colour and bright finisher styles to match the interior trim of later 1990s models. Please contact us for details of current availability.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
35	JPC6519	INSULATION, gearlever aperture	1	Rod gearchange models, when outer gaiter fitted.
36	FJN10003	PLATE, gearlever gaiter to floor	1	Rod gearchange models.
37	PTZ1006	SCREW, plate to floor	4	Rod gearchange models.
38	24A2047	PLATE, floor stiffening	1	Automatic models up to 1973 approx.
39	DXR410	RIVET, plate to floor	2	Automatic models up to 1973 approx.
40	ACA5328	PLUG, jacking hole in sill	2	Early MkI models only.
41	14G7836	STRIP, rubber, sealing load floor sides	A/R	Van and Pick Up models.
The first handful of vans in 1961 used seals retained by metal strips along the load floor edge. The rubber sealing strip listed here is the later type not requiring a metal strip to locate it.

Rubber Plugs and Grommets
Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
42	ALA4466	PLUG, driving lamp holes in front panel	A/R	1990 on; use to seal unused holes between bumper and grille.
43A	14A7091	PLUG, steering column hole in dash, 15/16" dia.	1	1959-85 approx.; rubber.
	BNP3894	PLUG, steering column hole in dash, 15/16" dia.	1	1985 approx. on; plastic.
43B	14A7081	PLUG, speedometer cable hole, 1" dia.	1	If required; seals unused hole in dash.
44	14A7091	PLUG, rear radius arm shroud, 15/16" dia.	2	1959-68.
45	14A7091	PLUG, aerial hole in wing, 15/16" dia.	1	If required.
46	14A7091	PLUG, wiper spindle holes, 15/16" dia.	2	1969 on; use to seal unused holes in windscreen panel.
47	CWB001	PLUGS, pair, wiper spindle holes, chromed finish	1	Aftermarket alternative.
48	13H8998	PLUG, mirror mounting holes on door	2	1969-79; use to plug unused holes in passenger's door on standard models.
49	AYB10020	PLUG, rectangular, A post and inner sill	8	1985 approx. on.; use to plug cavity wax holes in body.
50	CZH628	PLUG, door lock striker hole in B post	2	Saloon and Clubman Estate, 1969 on.
51	13H2475	PLUG, slinging shoe nut hole in outer sill	4
52	CZG778	PLUG, wiper motor hole in dash	1
53	14A7032	PLUG, fog lamp hole, rear valance	A/R
54A	RFR210	PLUG, inner wing rear corners	A/R
54B	14A7081	PLUG, rear (boot) floor, 1" dia.	A/R	If required.
55	3F90	GROMMET, fuel pipe through dash	1	Models with rear subframe mounted electric fuel pump.
56	14A7033	GROMMET, wiring harness through body, 11/16" dia.	A/R	Multiple applications.
57	AYA10003	GROMMET, washer tube through dash	1	1993 approx. on
58	34G3651	GROMMET, 1/2" dia. heater hose through dash	1
59	CLP6235	GROMMET, 5/8" dia. heater hose through dash	1
60	CAM5969	GROMMET, choke and heater cables through dash	2
61	WYA10001	GROMMET, triple, fuel pipes through rear floor	1	Fuel injection fitted models; can be used to plug hole in rear floor.
62	5L489	GROMMET, wiring harness through dash	1	1993 approx. on (no Rotodip hole).

Due to different holes of different sizes appearing on body shells manufactured in different plants (for instance, paint drain holes differing between Longbridge and Cowley built bodies), it would take more space than is available here to list all the plugs used down through the years, together with their applications. The above are application-specific plugs and grommets to be found on Minis. What follows is a list of round, natural rubber or plastic plugs and grommets, with sizes, which can be used to seal other holes in the car body. By the way, a ferrule grommet as listed below is a plug with a large hole in it (for example, to stop a hose chafing on the edge of a hole it passes through). A diaphragm grommet is a plug with a small hole in it (for example, to stop a cable from chafing on the edge of a hole, whilst sealing the hole from water ingress).

This is basically the old BMC range of natural rubber or plastic plugs and grommets. There is a corresponding range of items made from oil-resistant material: the 'RFR' range, which used to be distinguished by their red colour but seem to come through black more often than not nowadays. RFR-prefixed plugs and grommets have very specific applications and so are not listed here. The diaphram grommets shown as being suitable for large or extra large cables or pipes have internal holes capable of expanding to a greater degree.

Ill. No.	Part No.	Description	Qty. Rqd.	Remarks
63	RFN204	PLUG, fits 1/4" dia. hole	A/R
	RFN205	PLUG, fits 5/16" dia. hole	A/R
	RFN206	PLUG, fits 3/8" dia. hole	A/R
	RFN207	PLUG, fits 7/16" dia. hole	A/R
	RFN208	PLUG, fits 1/2" dia. hole	A/R
	RFN209	PLUG, fits 9/16" dia. hole	A/R
	RFN210	PLUG, fits 5/8" dia. hole	A/R
	RFN211	PLUG, fits 11/16" dia. hole	A/R
	RFN212	PLUG, fits 3/4" dia. hole	A/R
	RFN213	PLUG, fits 13/16" dia. hole	A/R
	RFN214	PLUG, fits 7/8" dia. hole	A/R
	RFN215	PLUG, fits 15/16" dia. hole	A/R
	RFN216	PLUG, fits 1" dia. hole	A/R
	RFN217	PLUG, fits 1 1/16" dia. hole	A/R
	RFN220	PLUG, fits 1 1/4" dia. hole	A/R
64	RFN102	FERRULE GROMMET, fits 1/2" dia. hole	A/R	1/8" dia. internal hole.
	RFN103	FERRULE GROMMET, fits 9/16" dia. hole	A/R	3/16" dia. internal hole.
	RFN104	FERRULE GROMMET, fits 5/8" dia. hole	A/R	1/4" dia. internal hole.
	RFN105	FERRULE GROMMET, fits 11/16" dia. hole	A/R	5/16" dia. internal hole.
	RFN106	FERRULE GROMMET, fits 3/4" dia. hole	A/R	3/8" dia. internal hole.
	RFN107	FERRULE GROMMET, fits 13/16" dia. hole	A/R	7/16" dia. internal hole.
	RFN108	FERRULE GROMMET, fits 7/8" dia. hole	A/R	1/2" dia. internal hole.
	RFN109	FERRULE GROMMET, fits 15/16" dia. hole	A/R	9/16" dia. internal hole.
	RFN110	FERRULE GROMMET, fits 1" dia. hole	A/R	5/8" dia. internal hole.
65	RFN302	DIAPHRAGM GROMMET, fits 3/8" dia. hole	A/R	1/8" dia. internal hole.
	RFN303	DIAPHRAGM GROMMET, fits 5/8" dia. hole	A/R	3/16" dia. internal hole.
	RFN305	DIAPHRAGM GROMMET, fits 5/8" dia. hole	A/R	5/16" dia. internal hole.
	RFN306	DIAPHRAGM GROMMET, fits 1" dia. hole	A/R	3/8" dia. internal hole.
	RFN308	DIAPHRAGM GROMMET, fits 1" dia. hole	A/R	1/2" dia. internal hole.
	RFN403	DIAPHRAGM GROMMET, fits 5/8" dia. hole	A/R	3/16" dia. internal hole, for large cables or pipes.
	RFN405	DIAPHRAGM GROMMET, fits 5/8" dia. hole	A/R	5/16" dia. internal hole, for large cables or pipes.
	RFN503	DIAPHRAGM GROMMET, fits 5/8" dia. hole	A/R	3/16" dia. internal hole, for extra large cables or pipes.

Request a free catalogue

Click here

Body panel
catalogue

Click here

Accessories
catalogue

Monday:	09.00am to 17.30pm
Tuesday:	09.00am to 17.30pm
Wednesday:	09.00am to 17.30pm
Thursday:	09.00am to 17.30pm
Friday:	09.00am to 17.30pm
Saturday:	09.00pm to 12.00pm

Body sealing hardware

GAITER-GEAR LEVER- (DOMED)-COOPER 997/1071-'61-'64

BLANKING PLATE-REMOTE GEARLEVER HOLE IN TUNNEL

RETAINING PLATE-MAGIC WAND GAITER TO FLOOR

GAITER-GEAR LEVER THROUGH FLOOR-DIRECT CHANGE

SPACER-SEAT BELT-'B' POST

BLANKING SCREW-TUNNEL,FLOOR&'B' POST SEAT BELT

USE: AK610021

COVER-ROTODIP HOLE-REAR BULKHEAD

USE: PTZ804

GASKET-BLANKING PLATE-AIR INTAKE HOLE-RH BULKHEAD

BLANKING PLATE-FRESH AIR TUBE THROUGH BULKHEAD

NUT - 5/16" UNF

We accept